Apply Serum 1 on the eyebrows or eyelashes.
Leave it to develop for 3-10 minutes depending on the eyebrow or eyelash hair condition (see the application instruction).
Then remove the excess of the solution with a cotton pad, moistened with water.
NOTE! It is necessary to do the allergy skin test before use: apply 2 drops of each solution on the small area of the inner elbow skin 48 hours before use. If there is no redness, inflammation or rash, begin the eyebrow or eyelash flexing procedure.
EYEBROW FLEXING PROCEDURE STAGES
1) Analyze the eyebrow hair condition of a client
Specify the processing time of the eyebrow flexing solutions according to the instructions following below:
1-st type: the eyebrow hairs are thick, spiky, not having undergone chemical procedures earlier (the eyebrow tinting or bleaching procedures) – processing time is 5–8 minutes for Serum 1 and no less than 6–8 minutes for Serum 2;
2-nd type: the eyebrow hairs are of the medium thickness, natural, healthy or having undergone chemical procedures earlier (eyebrow tinting or bleaching procedures) – processing time is 3–5 minutes for Serum 1 and 6–8 minutes for Serum 2;
The processing time of Multivitor is 5 minutes for all hair types.
NOTE! The maximum processing time of Serum 1 and Serum 2 is 15 minutes.
NOTE! The work of Serum 1 and Serum 2 depends directly on the room air temperature. The higher the temperature, the less the reaction time.
2) Prepare the eyebrows for the flexing procedure
- Use «ÉLAN professional line Cleansing detox-mousse for eyebrows and eyelashes with antibacterial effect» for the hair and skin cleansing before the eyebrow flexing procedure. Remove foam with a cotton pad, moistened with water.
3) Create the eyebrow shape (Serum 1)
NOTE! If a client has the thin and sensitive skin, it is necessary to apply a thin layer of the argan oil cream by ТМ ÉLAN professional line on the eyebrows and a thicker layer – on the skin around the eyebrows. It is recommended to use the professional make-up brush BLACKWOOD #4 by TM ÉLAN professional line.
- Apply Serum 1 on the eyebrows. It is recommended to use the professional make-up brush BLACKWOOD #3 by TM ÉLAN professional line.
NOTE! The maximum processing time should not exceed the processing time for the selected eyebrow hair type.
- When the processing time is finished, remove the excess of the solution with a cotton pad, moistened with water.
NOTE! It is important to take into consideration the eyebrow hair growth direction when creating the eyebrow shape. The eyebrow shape changes should be smooth in order to avoid folding of the hairs.
4) Fix the eyebrow hair direction (Serum 2)
NOTE! If a client has the thin and sensitive skin, it is necessary to apply a thin layer of the argan oil cream by ТМ ÉLAN professional line on the eyebrows and a thicker layer – on the skin around the eyebrows. It is recommended to use the professional make-up brush BLACKWOOD #4 by TM ÉLAN professional line.
- Apply and spread Serum 2 on the eyebrows setting the hairs in the right direction.
NOTE! The amount of the solution used at the IV-th stage of the eyebrow flexing procedure (Serum 2) should be equal to the amount of the solution used at the III-rd stage of creating the eyebrow shape (Serum 1).
NOTE! The processing time at the IV-th stage (Serum 2) should be equal to the processing time at the III-rd stage of creating the eyebrow shape (Serum 1), but no less than 6 minutes.
- When the processing time is finished, remove the excess of the solution with a cotton pad, moistened with water, if the eyebrow tinting procedure is planned.
- When the processing time is finished, remove the excess of the solution with a cotton pad, moistened with «ÉLAN professional line Cleansing detox-mousse for eyebrows and eyelashes with antibacterial effect» to stop the chemical reaction, if the eyebrow tinting procedure is not planned. Remove foam with a cotton pad, moistened with water.
5) Eyebrow hair care (Multivitor)
- Apply and spread Multivitor on the eyebrows. When the processing time is finished, remove the excess of the solution with a cotton pad, moistened with water, if the eyebrow tinting procedure is not planned.
- When the processing time is finished, remove the excess of the solution with a cotton pad, moistened with «ÉLAN professional line Cleansing detox-mousse for eyebrows and eyelashes with antibacterial effect» to stop the chemical reaction, if the eyebrow tinting procedure is planned. Remove foam with a cotton pad, moistened with water.
- Apply the tinting mixture on the eyebrows right after using «ÉLAN professional line Cleansing detox-mousse for eyebrows and eyelashes with antibacterial effect».